|DATE:MM/dd/yyyy hh:mm a|
|NO Data found in the past 48 hours for atmospheric readings.|
|Air Temperature||99 key|
|Precipitation Accumulation Data|
|As of DATE:MM/dd/yyyy hh:mm a for prior|
|10 mins||1 hr||3 hrs||6 hrs||12 hrs||24 hrs|
|NO Data found in the past 48 hours for precipitation readings.|
|Snow Depth Data|
|As of DATE:MM/dd/yyyy hh:mm a|
|Last reading||1 hr ago||3 hrs ago||6 hrs ago||12 hrs ago||24 hrs ago|
|NO Data found in the past 48 hours for snow depth readings.|
|Pavement Temperature (°F)|
|NO Data found in the past 48 hours for pavement readings.|
|somewhere||DATE:MM/dd/yyyy hh:mm a||0||0|
|Add/Update Site Views|
|Select Corridor or Area:|
|Select RWIS Site:|
|Select Camera View:|
|Site Name - View Name|
|Site name - View Name|
|Display Time Control|
The myRWIS feature provides a means to display current observations and camera images for a set of user selected sites. The system will loop through the selected sites, displaying each site for a user defined duration. The sites that you select will be stored as a cookie in your browser, so the next time you visit, it will remember your settings. The system will display RWIS sites with or without cameras.
The following sections describe the way to setup myRWIS to display the sites and camera views you desire.
The first time you visit myRWIS, you will need to setup the sites to display. You can do this using the following steps:
To change the order of selected sites:
To remove a site from the site selection list:
To modify a site from the site selection list:
To select how long to display each site's information, select the desired number of seconds from the option list in the "Display Time Control" area.
The following sections describe how to run the myRWIS display.
To start the display of selected sites, press the Play button near the right hand top of the screen. You may also choose to put your browser in full screen mode (F11 for Firefox, Internet Explorer and Google Chrome - Safari requires an extension to be installed).
Once you press play, the system will display each of your selected sites for the duration you selected. After a couple of seconds, the display controls at the top right of the screen and the mouse pointer will fade away. You can make them reappear by moving your mouse.
Press the Pause button at any time while the display is running to remain on the current site observations. Pressing the Play button will resume the loop through the sites.
When myRWIS is in the Play or Pause mode, you can backup to the prior site by pressing the Previous button.
When myRWIS is in the Play or Pause mode, you can advance to the next site by pressing the Next button.
When myRWIS is in the Play or Pause mode, you can stop the display and enter the setup mode by pressing the Stop/Setup button.
To close the myRWIS display, you can press the Close button at any time. A confirmation dialog will appear before myRWIS closes.
For questions or more information, please use the contact link below:Contact RWIS Manager